#41 Master Link or #41 Half Link

#41 Master Link or #41 Half Link

#41 Master (Connecting) Link,
This master link is for the #41 Chain,
recommended for most 4 stroke motors.
Connects the 2 male ends of the links,
be careful to not cut your chain too short.
(watch orientation) Closed end of clip must go into motor
and hit chain tensioner first or clip will pop off.
ANSI No. 41
Pitch – P 0.5in, 1/2inch pitch
Pin Length 0.570in 14.75mm
Pin Diameter – D 0.141in 3.57mm
Plate Height – H 0.386in
Plate Thickness – T 0.050in
Overall Width – F 0.265in
Overall Width – G 0.322in
Average Ultimate Strength 2,000lb
Finish Carbon Steel
#41 Half link for this chain, has a slightly longer pin
because it has a cotter pin (see picture).
Choose the combo of links you would like.
Caliper not included.