13 1/4 inch Inch Wide Sealed Pedal Crank Kit Cottered Euro Threaded Chrome Arms

With the pedal crank axle and the 5″ inch COTTERED OFFSET CRANK ARMS the
span between the pedals is 13 1/4 inches.
This axle is raw unfinished 1018 steel, machined in U.S.A.
paint it or clear coat to prevent rusting.
Includes 5″ inch COTTERED OFFSET CRANK ARMS Includes 3 cotter pins, and 2 snap rings.
Cotter pins will need to be filed to fit exactly.
See https://www.sheldonbrown.com/cotters.html
Takes 9/16th Axle Pedals not included.

European 3 Piece BB’s use small cups that thread into the frame, making installation easy.
This Euro Threaded Bearing kit uses four bearings to spread the load.
If used with a Sealed Pedal Crank Axle you will need to add a snap ring slot on the axle
due to the thickness of the bearing cups.
These bearings fit the Gasbike GT Aluminum Bike Frame With Built-in Gas Tank frame bottom bracket.
The spacers and bearing covers can be used if you wish, but you will need to dremmel or file new snap ring
slots to use spacers or change the right to left alignment of the axle.
The bearings fit very snuggley on the 3/4 diameter axle!
So snuggly that the bearings could ride over the existing snap ring slots or keyway slot.
Color: Black with Green seals
Material: CNC aluminum, Steel, Rubber shields
Threading: 1.370″ X 24 tpi
Inner Diameter: 3/4inch

3/4″inch I.D. Standard Pedal Sprocket Holder,
this sprocket holder was designed so you can use a standard
1 piece pedal crank sprocket. You just need to drill 3 holes in your sprocket.
Scribe with an ice pick the 3 holes on your original pedal sprocket,
drill with 9/32″ drill bit.
Or order the complete kit with the drilled 25 tooth sprocket included.
Includes 4 Allen head bolts and keystock,
and 2 pages of written instructions.

Pedal Axle Total Length 12 inches
Material 1018 Case hardened steel. Good weld-able qualities. Made In USA
Diameter 3/4 of an inch, ends 16mm Diameter with cotter pin and flat machined channel
Diameter at ends 0.63 In, 16mm
Weight of Kit: 3Lbs .08oz
Please view the Video although this kit includes different bearings
= https://www.youtube.com/watch?v=BmWtiTnzTDA