12″inch Span Square Taper Crank Axle Kit Sealed American Bearings 6″Inch Crank Arms
With this pedal crank axle kit the span between the pedals is 12 inches.
This axle is raw unfinished 1018 steel, paint it or clear coat to prevent rusting.
Made in USA.
This crankset can be the base of a do it yourself
reduction drive or CVT pedal shaft.
INCLUDES ITEMS PICTURED:
6″ inch Long Crank Arms Pair (choose option with 9/16ths pedals included)
2 Chrome Covers for Crank Arms Bolts (optional see drop down menu)
2 snap rings
1 American Sealed Bottom Bracket Bearing Set 3/4 I.D.
Fits standard 2 inch diameter bottom bracket shell.
3/4″inch I.D. Standard Pedal Sprocket Holder
this sprocket holder was designed so you can use a standard
1 piece crank sprocket.
You just need to drill 3 holes in your sprocket.
(Or see drop down menu and purchase with 25Tooth or 36Tooth Pedal sprocket)
Includes: 4 Allen head bolts and 3/16th keystock.
Axle Total Length: 12 inches
Standard Square Tapper Ends
Designed for the 2 inch diameter, 68mm wide, beach cruiser
American 1 piece bottom bracket with 3/4inch bore.
Pedal Axle Total Length: 12 inches
Material: 1018 Case hardened steel.
Good weld-able qualities. Made In USA
Diameter: 3/4 of an inch
Ends Standard Square Taper with 8mm FINE tapped hole in center.
Snap Ring Slots at 4 1/4, 4 1/2inches, and 7 1/2inches
Keyway uses 3/16th stock
Weight: 1Lb 5.4oz
The Axle was designed with a pull start
of engine offset to the right.
New snap ring slots can be filed,
dremeled or lathed out and
left to right adjustments can be made.
With new snap ring slots Dremeled or lathed out,(by purchaser)
wider bottom bottom bracket shells
such as FAT TIRE BIKES 83-110-120mm Bottom Bracket Shells
can be accommodated. The possibilities of
customization of this kit are great!
Please see samples in the Bike Gallery